WUTA Mesin Skiving Kulit Manual Tali Tipis Skiver Splitter Kulit Sapi Mesin Pengupas Kulit

Specifications

Material：Martensitic stainless steel+304 stainless steel

Machine Weight: about 1.75kg

Thinning width: within 8.5cm/3.34inch.

Thinner thickness: 0.5-4mm

Note：
1.The machine sharpness directly related to the blades. It is recommended to replace the blades frequently.
2.Thinning to thickness below 1.0mm requires very sharp new blade for operation, and is not suitable to thin below 1.0mm for soft and elastic leather materials.

Feature

【Customized design round & high-strength rubber handle】which does not rub or crack when pressed, and comfortable feeling.

【Customized double-bearing 304 stainless steel roller. 】Smoother rolling and more labor-saving.even women can easily operate.

【Customized knurled screw, more precise thickness adjustment.】Rotate the screw left and right can adjust the cutting thickness.Thickness accuracy can reach within 0.1mm

【Add the blade positioning device to place the blade accurately】ow to replace the blade：Remove the screw to replace the blade.Compatible with market standard size 18#-L blade of width 18mm/0.71 inches.

Note :

1、The above values are reference values, the actual cutting width is subject to the quality of leather, the proficiency and operation level of operators, they are very important factors affecting the cutting width.

2、The machine sharpness is directly related to the blade.It is recommended to replace the blade frequently or choose a higher quality blade.

3、Wipe the roller clean before use to prevent staining the leather. It is recommended to use scrap leather for test first.

About size

Machine Weight: about 1.27kg

Thinning width: within 8.5cm/3.34inch.

Thinner thickness: 0.5-4mm

Customized design round & high-strength rubber handle

which does not rub or crack when pressed, and comfortable feeling

------Customized double-bearing 304 stainless steel roller.
Smoother rolling and more labor-
saving.even women can easily operate.
------Customized knurled screw, more precise thickness adjustment
Rotate the screw left and right can adjust
the cutting thickness.Thickness accuracy
can reach within 0.1mm

WUTA VS OTHER BRAND

WUTA
①Round & high-strength rubber handle.
②Blade positioning device,place the blade accurately.
③Customized knurled screws.
④Larger bottom plate. Press more stable and not easy to tip over when pulling.

Other brand

①Steel handle hurts your hand and uncomfortable, wooden handle is easy to crack when pressed.
②Without positioning device, so it is difficult to install the blade position accurately.
③Small bottom plate, the center of gravity is unstable, easy to tip over when pressed

Operation method

①Press the handle down, the roller leaves the blade.
②Put the leather with the back facing up, then pull out the leather evenly and forcefully.

Maximum cutting width 8.5cm/3.34inch

The blade length is about 9.8cm, and we recommend to cut leather of max width 8.5cm. The wider the leather is, the more difficult it is to operate.

How to adjust the leather thickness

Control the screw to adjust the cutting thickness.