WUTA LEATHER
4/5/6mm Copper Rivets Fastener Install Mold | WUTA
4/5/6mm Copper Rivets Fastener Install Mold | WUTA
В наличии: 91
Не удалось загрузить сведения о доступности самовывоза
Specification
Brand: WUTA
Material: stainless steel, completely polished finish
Specifications: 3 sizes available
Size L： Suitable for shank diameter 4mm copper rivets
Size M： Suitable for shank diameter 3.3mm copper rivets
Size S: Suitable for shank diameter 6mm copper rivets
Treatment: hardened by quenching.
Please pay attention to confirm the shank diameter size of your copper rivets before purchase.
Features
1----Easy to install. This copper rivet fastener install mold is originally designed, we have tested and tested, it is easy to install the copper rivet and finish it to a smooth semicircle ball surface effect.
2----Easy to operate and quick to install. Don't worry about installation failure.
3----Made with 420B martensitic stainless steel. Martensitic stainless steel has good machining performance. After heat treatment (quenching and tempering), it has excellent corrosion resistance, polishing performance, high strength, and wear resistance..
4----Mirror polishing process, smooth surface, and burr-free. After mirror polishing, the metal's own luster is brought out, and the hardness, rust prevention, and wear resistance are excellent.
5----The non-slip handle can be held firmly when in use.
Notice
---The item does not include a copper rivet or other tools. If you need all of them, feel free to contact us.
---Installation Operation tips: During installation, due to the brass rivet with high hardness, please follow our video to install, and use a metal block as the bottom, then use the metal hammer to strike hard. This is the only way to install it firmly.
Installation steps
Installation Operation tips: During installation, due to the brass rivet with high hardness, please follow our video to install, and use a metal block as the bottom, then use the metal hammer to strike it hard. This is the only way to install it firmly.
Please note that the hammer, hole punch, nippers， and rivets shown in the photos are just for reference, not included in the package.
1: Punch the hole in the leather, and put the rivet into the hole （just like the photo).
2. Use the cylindrical tool to knock down and fix the burr down tight against the material.
3. Use nippers to cut off the redundant bottom bar and reserve a convex position of 2-3mm.
4 .Put the vertebral tool on the rivet, then beat it until the extra rivets are knocked into a semicircle.
