WUTA 1pc Anti-Rust Leather Hollow Punch Rectangle Slot Puncher Oblong Hole Cutter

Description

Brand: WUTA
Name: Black oblong/rectangle hole punch
Size: 13 different sizes available
Use Application: Punching holes in belt/watch band/leathercraft

Features

1. Original design and sharp blade, fit for professional leather craft men. Made of high-quality with special process heat treatment, make great hardness and toughness better.

2. The whole body with black electroplating on the surface, with strong anti-rust performance and wear resistance, is sturdy, provides a comfortable hand feeling, suitable for intensive stamping and long-term leatherworking craft.

3. A clear size mark, making it easy to find the correct size.

4. Original and practical design, wide discharge port, the punching is smoother, not easy to block, and the leather can come out easily.

5. 13 size available, can be used to make clean oblong shapes in leather, belts, straps, gaskets, clothes, rubber, and other soft materials.

Use Notice:

1. Perpendicular to the leather surface, tap it lightly, and then force it until it penetrates 0.5-1mm. If the leather doesn't penetrate, keep hitting until it penetrates. The size is more than 8*8mm, because the cutting area is relatively large, it needs to be tapped with a metal hammer a few more times.

2. Because of the sharp and thin tip, please don't overexert when punching, and please do not use a hard nylon plate as a backing plate to punch holes. Please use soft materials like leather to protect it; it may be damaged if you use it on a hard object.

3. Each product surface is coated with a little rust preventive oil after production. Please wipe clean before use. When you no longer use the punch tool, apply some oil to the surface and place it in a dry and ventilated place. This will better protect the tool.

High-Temperature Treatment Process

To increase the hardness & anti-rust ability.

If the leather doesn't penetrate, keep hitting until it penetrates. The size more than 3*10mm, and the cutting area is relatively large. It's better to use the metal hammer to tap it.