60MM Leather Strip Cutting Machine Leather Strap Cutter | WUTA

Specification:
--- Name: Manual Leather Strap Cutter
--- Material: stainless steel, aluminum alloy
--- Machine size: 12cm*12cm*9cm
--- Cutting width: 0-60mm(Can be cut to any width under 60mm)
--- Machine weight: 1.0kg
--- Contains: 1 leather strap cutter, 10 black sharp blades, 1 G clip, 8 hex wrenches

Feature：

🌟Manual Leather Strap Cutter: equipped with 10 black sharp blades, 1 G clip, 8 hex wrenches, easy to adjust and replace, no need to purchase additional accessories;

🌟Material: This leather manual cutting machine is made of stainless steel and aluminum alloy, with a smooth surface, good texture, and durability.

🌟Easy to operate: You can hold the machine by hand or fix it on the table with G clips to pull out the leather. Applicable leather materials: vegetable tanned leather, bridle leather, belt leather, hard leather, thick leather, etc.

🌟Maximum cutting width: loosen the screw to adjust the cutting width and leather thickness, 60MM (any width below 60MM can be processed);

！！Reminder: Suitable for cutting thick and hard leather, such as vegetable tanned saddle leather, etc. It is not suitable for soft and thin leather.

Notice about use

★ Proficiency will affect the effect. At the beginning of use, you may find it a little difficult to operate and have an uneven belt width. This is a normal phenomenon. Please follow the video operation tutorial. before operation, please cut the original leather edges to keep them straight, then keep them stable during the operation. Pull along the leather edge and practice more times. The width will be very uniform. If you have any problems in use, please leave a message for us.
★The machines are not high-precision equipment; there may be slight machining marks and small bumps on the surface.
★The size is measured manually. Please understand there may be an error of 1-3mm.

 

Easy to cut the belt strap

Applicable: vegetable-tanned leather, bridle leather, belt leather, hard leather, thick leather, etc.

Removing the screw can replace the blade.

This model uses a regular blade with a width of 18mm.

Can cut thick and hard leather, but not soft and thin leather.

The width of the leather can be cut <60mm, and the thickness of the leather is recommended to be 2-8mm.

Usage method

1. First, fix the belt-cutting machine on the edge of the workbench and secure it with C-shaped clips.

2. Install the blade, break the blade to a suitable height, place it & tighten it with a hex wrench. Loosen the screw & adjust the width of the strip, and tighten the screw with a wrench after fixing the position.

3. Adjust the height according to the thickness of the leather material. After adjusting the push leather, it can be cut.