Leather Hole Punch Set Rectangle Shape Anti-Rust Leather Craft Oblong Punching Tool|WUTA

Description

Brand: WUTA
Name: Black rectangle hole punch
4 Sets:Set A-6 Size \Set B-4 Size \Set C-3 Size \Set D-13 Size
Use Application: Punching holes in belt/watch band/leather craft

Features

1. The Black rectangle punch comes with carbon steel material and high high-temperature treatment process with high hardness, a sharp blade, and clear cutting edges.

2 . A wide groove helps to discharge and smooth punching without blockage, continuous punching without obstacles.

3. The whole punch is sturdy, provides a comfortable hand feeling, suitable for intensive stamping and long-term leather working craft.

4. Different sets available can be used to make clean rectangle shapes in leather, belts, straps, rubber, and other soft materials.

Use Notice:

1. Perpendicular to the leather surface, tap it lightly, and then force it until it penetrates 0.5-1mm. If the leather doesn't penetrate, keep hitting until it penetrates. The size is more than 3*10mm, because the cutting area is relatively large, it's better to use the metal hammer to tap a few more times.

2. Due to the sharp and thin tip, please don't overexert when punching, and please do not use a hard nylon plate as a backing plate to punch holes. Please use a soft material like leather to protect it; it may be damaged if you use it on a hard object.

3. Each product surfaces are coated little rust preventive oil after production. Please wipe clean before use. When you no longer use the punch tool, apply some oil to the surface and place it in a dry and ventilated place. This will better protect the tool.

If the leather doesn't penetrate, keep hitting until it penetrates. If the size is more than 3*10mm and the cutting area is relatively large, you can use the metal hammer to tap it a few more times. And the table has to be hard. Otherwise, the power of the hammer will be smaller.